// Provide alternate content for browsers that do not support scripting
// or for those that have scripting disabled.
Alternate HTML content should be placed here. This content requires the Adobe Flash Player.
Get Flash
How do you rate Honeywell Batteries products in terms of quality?
Zebra RFS6000
RFS6000 Wireless LAN Switch The RFS6000 provides a single platform capable of delivering carrier-grade wireless voice and data inside and outside the enterprise for medium to large organizations with 2,000-20,000 users. Improve operational efficiency and reduce the cost of mobility with a powerful comprehensive feature set including Adaptive AP, which delivers unmatched performance, security, reliability and scalability to enable networks for business mobility at a low TCO. Built on Zebra’s Wireless Next Generation (Wi-NG) architecture, the RFS6000 supports Wi-Fi, RFID, seamless roaming, next-generation self-healing, 3G/4G wireless broadband backhaul, gap-free layered security, rich locationing services, 802.11n with Mesh, centralized management and more.
802.1D-1999 Ethernet bridging; 802.11-.802.3 bridging; 802.1Q VLAN tagging and trunking; proxy ARP; IP packet steering-redirection
Wireless Networking
Wireless LAN: Supports 32 WLANs; multi-ESS/BSSID traffic segmentation; VLAN to ESSID mapping; auto assignment of VLANs (on RADIUS authentication); power save protocol polling; pre-emptive roaming; VLAN Pooling and dynamic VLAN adjustment; IGMP Snooping Bandwidth management: Congestion control per WLAN; per user based on user count or bandwidth utilization; dynamic load balancing of AP300s and Adaptive APs in a cluster; bandwidth provisioning via AAA server Layer 2 or Layer 3 deployment of thin access ports and Adaptive AP AP-51X1 802.11a/b/g and AP-7131 802.11a/b/g/n access points Layer 3 Mobility (Inter-Subnet Roaming) IPv6 client support Thin Access Ports: Supports 1-48 “thin” 802.11a/b/g AP300 access points for L2 or L3 deployment per RFS6000 Switch/controller and 576 802.11a/b/g AP300s per cluster; Legacy support: AP100 for L2 deployments only Adaptive AP: Supports adoption of 256 adaptive AP-51X1 802.11a/b/g and AP-7131 802.11a/b/g/n access points in adaptive mode per RFS6000 Switch/controller and 3,072 per cluster; multiple country configuration support; Legacy support: AP-4131 port conversion for L2 deployments only Power-over-Ethernet: Integrated; up to 29.7 watts per Ethernet port, up to a maximum of 180 watts for simultaneous operation Radio frequency automatic channel select (ACS); Transmit power control management (TPC); Country code-based RF configuration; 802.11b, 802.11g 802.11a, and 802.11n
Network Security
Role-based wired/wireless firewall (L2-L7) with stateful inspection for wired and wireless traffic; Active firewall sessions — 100,000 per RFS6000 Switch/controller and 1,200,000 per cluster; protects against IP Spoofing and ARP Cache Poisoning Access Control Lists (ACLs): L2/L3/L4 ACLs Wireless IDS/IPS: Multi-mode rogue AP detection, Rogue AP Containment, 802.11n Rogue Detection, Ad-Hoc Network Detection, Denial of Service protection against wireless attacks, client blacklisting, excessive authentication/association; excessive probes; excessive disassociation/deauthentication; excessive decryption errors; excessive authentication failures; excessive 802.11 replay; excessive crypto IV failures (TKIP/CCMP replay); Suspicious AP, Authorized device in ad-hoc mode, unauthorized AP using authorized SSID, EAP Flood, Fake AP Flood, ID theft, ad-hoc advertising Authorized SSID Geofencing: Add location of users as a parameter that defines access control to the network WIPS sensor conversion: Supported on the AP300 and the Adaptive AP-5131 and AP-7131 Anomaly Analysis: Source Media Access Control (MAC) = Dest MAC; Illegal frame sizes; Source MAC is multicast; TKIP countermeasures; all zero addresses Authentication: Access Control Lists (ACLS); pre-shared keys (PSK); 802.1x/EAP—transport layer security (TLS), tunneled transport layer security (TTLS), protected EAP (PEAP); Kerberos Integrated AAA/RADIUS Server with native support for EAP-TTLS, EAP-PEAP (includes a built in user name/password database; supports LDAP), and EAP-SIM Transport encryption: WEP 40/128 (RC4), KeyGuard, WPA—TKIP, WPA2-CCMP (AES), WPA2-TKIP 802.11w: Provides origin authentication, integrity, confidentiality and replay protection of management frames for Zebra’s AP300 access point IPSec VPN gateway: Supports DES, 3DES and AES-128 and AES-256 encryption, with site-to-site and client-to-site VPN capabilities; supports 1,024 concurrent IPSEC tunnels per switch — 12,288 per cluster Secure guest access (Hotspot provisioning): Local Web based authentication; URL redirection for user login; customizable login/welcome pages; support for external authentication/billing systems, usage-based charging Wireless RADIUS Support (Standard and Zebra Vendor Specific Attributes): User Based VLANs (Standard) MAC Based Authentication (Standard) User Based QoS Location Based Authentication (Zebra VSA) Allowed ESSIDs NAC support with third party systems from Microsoft and Symantec
System Resiliency & Redundancy
Active:Standby; Active:Active and N+1 redundancy with access port and MU load balancing; Critical resource monitoring Virtual IP: Single virtual IP (per VLAN) for a switch/contoller cluster to use as the default gateway by mobile devices or wired infrastructure SMART RF: Network optimization to ensure user quality of experience at all times by dynamic adjustments to channel and power (on detection of RF interference or loss of RF coverage/neighbor recovery) Dual Firmware bank supports Image Failover capability
Real Time Locationing System (RTLS)
RSSI based triangulation for Wi-Fi assets Tags supported: Ekahau, Aeroscout, Newbury, Gen 2 Tags RFID support: Compliant with LLRP protocol. Built-in support for the following RFID readers: fixed (XR440, XR450, XR480; mobile (RD5000) and handheld (MC9090-G RFID)
Optimized Wireless QoS
RF priority: 802.11 traffic prioritization and precedence Wi-Fi Multimedia extensions: WMM-power save with TSPEC Admission Control; WMM U-APSD IGMP snooping: Optimizes network performance by preventing flooding of the broadcast domain SIP Call Admission Control: Controls the number of active SIP sessions initiated by a wireless VoIP phone 802.11k: Provides radio resource management to improve client throughput (11k client required) Classification and marking: Layer 1-4 packet classification; 802.1p VLAN priority; DiffServ/TOS
System Extensibility
ExpressCard™ Slot: Driver support for 3G wireless cards for WAN backhaul • AT&T (NALA) – Option GT Ultra Express • Verizon (NALA) – Verizon Wireless V740 Express Card • Vodaphone (EMEA) – Novatel Merlin XU870 • Vodaphone (EMEA) – Vodaphone E3730 3G Expresscard • Telstra (Australia) – Telstra Turbo 7 series Expresscard (Aircard 880E) • General Use (NALA/APAC) – Novatel Merlin XU870 PCI-X interface
Management
Command line interface (serial, telnet, SSH); secure Web-based GUI (SSL) for the wireless switch and the cluster; SNMP v1/v2/v3; SNMP traps—40+ user configurable options; Syslog; TFTP Client; secure network time protocol (SNTP); text-based switch configuration files; DHCP (client/server/relay), switch auto-configuration and firmware updates with DHCP options; multiple user roles (for switch access); MIBs (MIB-II, Etherstats, wireless switch specific monitoring and configuration); Email notifications for critical alarms; MU naming capability
Physical Characteristics
Form factor: 1U Rack Mount Dimensions: 1.75 in. H x 17.32 in. W x 15.39 in. D 44.45 mm H x 440 mm W x 390.8 mm D Weight: 14 lbs./6.35 kg Physical interfaces: 1x Uplink Port -10/100/1000 Cu/ Gigabit SFP interface 8x 10/100/1000 Cu Ethernet Ports with 29.7 Watts PoE, 802.3af and 802.3at Draft 1x 10/100 Management Interface (OOB port) 1x USB 2.0 Host 1x ExpressCard™ Slot (in USB mode) 1X PCI-X Interface 1x Serial Port (RJ45 style) MTBF: >65,000 Hours
Power Requirements
AC input voltage: 90 – 264 VAC 50/60 Hz Max AC input current: 6A@115 VAC, 3A@230 VAC Input frequency: 47 Hz to 63 Hz
User Environment
Operating temperature: 32° F to 104° F /0° C to 40°C Storage temperature: -40° F to 158° F/-40° C to 70°C Operating humidity: 5% to 85% (w/o condensation) Storage humidity: 5% to 85% (w/o condensation) Heat dissipation: 665 BTU per hour
Regulatory
Product safety: UL / cUL 60950-1, IEC / EN60950-1 EMC compliance: FCC (USA), Industry Canada, CE (Europe), VCCI (Japan), C-Tick (Australia/New Zealand)
Recommended Enterprise Mobility Services
Customer Services: Service from the Start Advance Exchange Support
RFS4000 802.11n Integrated Services Controller The RFS4000 802.11n Integrated Services Controller is designed to provide any branch office or remote facility with high performance, comprehensive, cost-effective and secure wireless and wired networking services. No matter what the networking needs are in your branch offices, the RFS4000...
RFS6000 Wireless LAN Switch The RFS6000 provides a single platform capable of delivering carrier-grade wireless voice and data inside and outside the enterprise for medium to large organizations with 2,000-20,000 users. Improve operational efficiency and reduce the cost of mobility with a powerful comprehensive feature set including...
Virtualized software - based WLAN controller Comprehensive Cloud ready wireless services and a single point of control for any size enterprise The VX 9000 combines the power of virtualization with industry-leading WiNG Controller, creating a virtual controller in a class of its own. The cost-effectiveness...
The RFS7000 delivers unmatched performance, security, resiliency, scalability and manageability for the large wireless enterprise/campus/warehouse, providing a single platform capable of delivering carrier-grade wireless voice and data for 8,000-96,000 users. Zebra's Wireless Next Generation (Wi-NG) architecture improves operational...
Simplify and reduce the cost of wired and wireless networking in your branch offices To best serve your customers, your workers need mobile access to voice and data. Until today, delivering those services required multiple networking appliances in each branch office — each with its unique management interface....
EX 3500 ETHERNET SWITCH The Wired Ethernet switch unified wired-wireless networks Get all the wired networking features you need, plus the simplicity of a single point of management for all your wireless and wired network infrastructure The perfect complement for your...